Abstract
Ignition process in a premixed methane-air swirl configuration is studied using a large eddy simulation method with Smagorinsky sub-grid scale model. A developed thickened flame combustion approach with two-step methane-air mechanism is used. Non-reacting mean and RMS axial, tangential and radial velocity profiles are validated against the experimental results. It is shown that the flow field consists of four zones: Inner Recirculation Zone, Inner Shear Layer, Outer Shear Layer and Corner Recirculation Zone. The mean and RMS of velocities and temperature in reacting flow are then validated against the experimental data. Large eddy simulation is used to investigate the ignition sequence by sparking in the four zones in the flow field. Flame growth, propagation and stabilization are studied for these cases. Results show that sparking in IRZ has the fastest flame growth and takes the minimum time to reach flame stabilization. Propagating flame surface in all cases has sharp flame edges, without any hysteresis for flame position. Finally, flame structures are analyzed by flame curvature and the effect of flow field velocity on the flame surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.