Abstract
Combustible gases, such as CO, CH4, and H2, are produced during spontaneous coal combustion in goaf, which may cause an explosion under the stimulation of an external fire source. It is of great significance to study the influence of combustible gases, such as CO and H2, on the characteristics of a gas explosion. In this study, CHEMKIN software (Version 17.0) and the GRI-Mech 3.0 reaction mechanism were used to study the influences of different concentration ratios between CO and H2 on the ignition delay time, free radical concentration, and key reaction step of a gas explosion. The results show that the increase in the initial CH4 and CO concentrations prolonged the ignition delay time, while the increase in the H2 concentration shortened the time and accelerated the explosion reaction. The addition of H2 promoted the generation of free radicals (H⸱, O⸱, ⸱OH) and accelerated the occurrence of the gas explosion. CO generated ⸱OH free radicals and dominated the methane consumption through the R119 and R156 reactions. As the concentrations of CO and H2 increased, the R38 reaction gradually became the main driving factor of the gas explosion.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
