Abstract
Abstract At low temperature, the performance of battery declines significantly. Thus Battery Thermal Management System (BTMS) for heating and maintaining its temperature in proper range is crucial when the batteries of electric vehicle operate in cold climate. The objective of this study is to investigate the effects of heating parameters on the heating performance of BTMS based on heat/cold plate method. A 3D model of 6 battery cells and heat/cold plate was built in COMSOL. The numerical study considered three effects under the cold climate of −20 °C, which are the discharge rate of battery, inlet mass flow rate of heating medium and inlet temperature. According to the results, the batteries cannot be heated to its proper operating temperature range only by vaChongqingrying the discharge rates of battery. In addition, the discharge rates also have a negligible effect on the temperature raising compare with external heating source. With external heating source, higher mass flow rate can achieve a better heating performance, but it is limited when the mass flow rate exceeds 0.065 kg/s, which increase of the heating medium inlet temperature can more quickly heat up the batteries, but it may lead to the maximum temperature of batteries exceeds 40 °C. Among the calculated temperatures, the inlet temperature around 45 °C can be a reasonable temperature for the battery heating of BTMS based on heat/cold plate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.