Abstract

Abstract Being the latest representative of GIAs, the OMNI-Max anchor performs comprehensive behaviors in the seabed, like keying and diving, by adjusting orientation and position to derive higher capacity and therefore to avoid anchor failure. Current research of OMNI-Max anchors is concentrated on clay, while there is a notable gap of the work on sand. During the keying process of GIAs, many factors may influence the keying capacity, such as the embedment depth, the anchor orientation, the rotational center, the bearing area and the soil strength. Large deformation finite element analyses combined with a bounding-surface plasticity constitutive model are performed to investigate systematically the keying behavior of GIAs. A series of analytical cases involving multiple factors are designed and analyzed to explore the effects of various factors on the keying capacity of GIAs, defined by the soil resistance coefficient during keying. The soil resistance coefficient increases with increasing soil density, while it tends to be stable with the increase of the embedment depth. The closer the rotational center approaches to the two ends of the anchor, the greater the soil resistance coefficient becomes. An explicit expression of the soil resistance coefficient during keying is derived to quantify the effects of various factors. These findings are helpful to understand further the comprehensive anchor behaviors and to promote the application of GIAs in offshore engineering.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call