Abstract
A 3D numerical model was established to study the flow field characteristics and particle erosion in ultrasonic vibration-assisted abrasive waterjet machining by using computational fluid dynamics. The vibration of target is realized by using user-defined functions and dynamic meshing. The trajectories of abrasive particles dispersed in fluid flow are calculated by employing discrete phase model. The material removal on impacted surface was considered by an erosion rate model. The results indicated that the erosion rate at center area of impacted zone is lower than that at peripheral area, which is owing to the influence of stagnation zone. The variation of pressure value at the impacted surface is related to the vibrating movement of workpiece. Due to the weakening of stagnation effect, the pressure value decreases with a reduction of impact angle. Moreover, it was found that the erosion rate induced by particle impact on target surface is increased when vibration is applied. The influence of ultrasonic vibration on erosion rate is more significant at lower impact angle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The International Journal of Advanced Manufacturing Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
