Numerical study on flow and heat transfer characteristics in the rod bundle channels under super critical pressure condition

Abstract

In this study, the 3D flow and heat transfer characteristics in rod bundle channels of the super critical water-cooled reactor were numerically investigated using CFX codes. Different turbulent models were evaluated and the flow and heat transfer characteristics in different typical channels were obtained. The effect of pitch-to-diameter ratio ( P/ D) on the distributions of surface temperature and heat transfer coefficient (HTC) was analysed. For typical quadrilateral channel, it was found that HTC increases with P/ D first and then decreases significantly when P/ D is <1.4. There exists a “flat region” at the maximum value when P/ D is 1.4. If P/ D is larger than 1.4, heat transfer deterioration (HTD) occurs as main stream enthalpy is quite small. Furthermore, the HTD under low mass flow rate and the non-uniformity of circumferential temperature were also discussed.