Abstract
In this study, the compression characteristics of bimodal cohesive particles were investigated using a discrete element method (DEM) simulation. The compression and packing processes were simulated under different conditions of size ratios of 1–4 and fine particle mixing ratios of 0–0.5. The cohesive force was expressed using the surface energy proposed by the Johnson-Kendall-Roberts (JKR) cohesion model having a surface energy of 0–0.2 J/m2. The calculated results demonstrated that even in the case of cohesive particles, an increase in the particle size ratio reduced the void fraction of the powder bed during the packing and compression processes. In addition, it was found that the cohesive force decreased the contact number, especially the coarse-coarse contacts, although it had little impact on the void fraction. Our DEM simulations suggested that it is necessary to evaluate the contact numbers even under similar void fractions, which will be essential in the case of different material mixtures, such as all-solid-state batteries.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
