Numerical study of the MHD flow around a bounded heating cylinder: Heat transfer and pressure drops

Abstract

This work studies numerically the flow around an electrically insulated heating cylinder, bounded by walls of non-uniform electrical conductivity and subjected to a transversal magnetic field, with non-null components in the toroidal and poloidal directions. The configuration is representative of a typical breeding blanket segment in tokamak fusion reactors: to minimize magnetohydrodynamic (MHD) pressure drops, the liquid metal can be employed just as tritium breeder, whereas a non-conductive secondary fluid is used as coolant. The coolant is carried in the breeding zone by pipes that, being transversal to the stream-wise direction, affect the flow features and heat transfer. The flow is investigated by simulations performed in a 3D domain for Reynolds number 20 and 40, 0≤M≤50 for the Hartmann number and 0°≤α≤32° for the magnetic field inclination on the toroidal axis. The transition to the MHD regime causes the suppression of the cylinder wake and the disappearance of the steady vortex structures. Electromagnetic coupling balances the flow rates between the top and bottom sub-channels, individuated by the cylinder. The flow pattern modifications affect the heat transfer, which is found to increase with both M and α in the considered range, albeit for the latter in a non-monotonic trend. The pressure drop in the channel exhibits a similar behaviour. Moreover, it is dominated by the fully developed component due to the 2D currents, whereas the cylinder pressure drop contribution decreases steadily with the intensity of the applied magnetic field. The simulations were performed with ANSYS CFX-15.