Abstract
Gas distribution plays a significant role in an oxygen blast furnace. The uneven distribution of recycling gas from the shaft tuyere has been shown to affect the heat distribution and energy utilization in an oxygen blast furnace. Therefore, the optimal design and operating parameters beneficial to the gas distribution in an oxygen blast furnace should be determined. In total, three parameters and 22 different conditions in an oxygen blast furnace multifluid model were considered. The gas and heat distributions in an oxygen blast furnace under different conditions were simulated and compared. The study revealed that when the height of shaft tuyere decreased from 7.8 m to 3.8 m, the difference in top gas CO concentration between the center and edge decreased by 11.6%. When the recycling gas temperature increased from 1123 K to 1473 K, the difference in the top gas CO concentration between the center and edge decreased by 3.9%. As the allocation ratio increased from 0.90 to 1.94, the difference in the top gas CO concentration between the center and edge decreased by 3.0%. Considering both gas and heat distributions, a shaft tuyere height of 3.8 m to 4.8 m, a recycling gas temperature of 1473 K and an allocation ratio of 1.94 are recommended in practice under the conditions of this study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.