Abstract

PurposeThis study aims to investigate the effectiveness of two types of winglets, multi-tip and raked, on the performance of sinusoidal and simple leading-edge wings and compares it by a numerical method.Design/methodology/approachThe wing configuration in this study is rectangular and uses NACA0020 section, and all simulations are performed by a numerical method based on finite volume and base pressure algorithm in Reynolds 2 × [10]^5. In the mentioned numerical method, the flow is considered turbulent, and the k-ω-SST model is used. To calculate the stresses on the wing surface, the mesh is extended to below the viscous layer, and a second-order upstream accuracy is used to calculate the convection flux.FindingsThe use of raked and multi-tip winglets for the sinusoidal edge of the wing improved aerodynamic performance by 5.12 and 2.28%, respectively, and the greatest effect of these two winglets was on increasing the lifting force and reducing the inductive drag, respectively. Also, by examining the distribution of induced vortices around the configurations, it was found that the curvature of the sinusoidal wing tip at the angles of attack before stall reduced the strength of the induced vortices and, the use of winglet during and after stall, caused increased aerodynamic performance of the sinusoidal wing.Practical implicationsThe whale is an international species of aquatic animal found in most of the world’s oceans. It has large fin aspect ratios that have a series of bulges at the edge of the attack, which improves the aerodynamic performance near and after stall. Today, one of the fields of research is the use of this idea in the wings of micro air vehicle.Originality/valueWinglet reduces induced drag in simple wings. So far, the effect of winglets on wings with sinusoidal attack edges has not been investigated.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call