Abstract
In this work, the laminar flame speed and flame structure of biogas/H2 fuel mixtures were studied numerically from pure biogas to biogas with an addition of 15% H2 in volume by using the CHEMKIN software with the GRIMECH 2.11 kinetic mechanism. The effect of hydrogen addition to biogas on laminar flame speed and flame structure has been studied as well as the variation of the aeration rate from stoichiometric conditions to lean conditions. The trends in laminar flame speed results obtained are explained by means of numerical results on temperature profile and heat release rate. CO, CO2 and NO profiles are also observed for the different mixtures studied. Hydrogen addition in biogas flames shows an important effect, especially in zones near stoichiometric flames, decreasing its effects in lean mixtures combustion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Renewable Energy Research
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.