Abstract

In this paper, a systematic study on the supersonic boundary-layer modal stability for a slightly rarefied gas is conducted by considering velocity slip and temperature jump effects in the Navier–Stokes (NS) equations. The effects of slip boundary on the first- and second-mode instability at different conditions are presented in detail. The laminar flow is obtained by solving the NS equations along with no-slip and slip boundary conditions, which shows that the slip boundary causes the boundary layer becoming thinner and the supersonic region near the wall becoming narrower. The perturbation slip boundary conditions at the wall and their influence on the stability are carefully discussed. The tangential momentum accommodation coefficient and the thermal accommodation coefficient are set equal or unequal for a broad range to study the combined or leading effects of velocity slip and temperature jump, respectively. It is found that velocity slip significantly stabilizes the second-mode disturbances while largely destabilizes the first-mode perturbations. On the contrary, the temperature jump apparently enhances the second-mode instability, while it has little influence on the first mode. When velocity slip and temperature jump are both present, the first mode is more destabilized, while a competitive effect acts on the second mode. Additional results show that the neutral stability curves for the second and third modes as well as the synchronization between fast and slow modes are delayed further downstream due to velocity slip. These findings are shown consistently regardless of the wall cooling for both supersonic and hypersonic flows.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.