Numerical study of mixed convection nanofluid in an annulus enclosure between outer rotating cylinder and inner corrugation cylinder

Abstract

AbstractNumerical investigations are presented for mixed convection problems in a concentric inner sinusoidal cylinder and an outer rotating circular cylinder, which were kept at constant hot and cold temperatures, respectively. The free space between the cylinders and the enclosure walls was filled with a water‐Cu nanofluid. The governing equations are formulated for velocity, pressure, and temperature formulation and are modeled in COMSOL5.2a, a partial differential equation solver based on the Galerkin finite element method. The governing parameters considered are the solid volume fraction, [0, 0.02, 0.04, and 0.06], Re (1, 25, 100, 200, and 300), and Ra (less than 104), and the inner cylinder corrugation frequencies varied from (N = 3, 6, and 9). According to the calculations, the Reynolds number, the Rayleigh number, the nanoparticle volume fraction, and the number of corrugations play an important role of forming the stream and isothermal lines, the local and the average Nusselt number inside the annulus enclosure. The average Nusselt number decreases with increasing Reynolds number and the number of corrugations, while it increases as the Rayleigh number and the volume fraction increase.