Abstract

Heavy liquid metals (HLM) are attractive coolants for nuclear fission and fusion applications due to their excellent thermal properties. In these reactors, a high coolant flow rate must be processed in compact heat exchangers, and as such, it may be convenient to have the HLM flowing on the shell side of a helical coil steam generator. Technical knowledge about HLM turbulent heat transfer in cross-flow tube bundles is rather limited, and this paper aims to investigate the suitability of Reynolds Average Navier–Stokes (RANS) models for the simulation of this problem. Staggered and in-line finite tube bundles are considered for compact (a=1.25), medium (a=1.45), and wide (a=1.65) pitch ratios. The lead bismuth eutectic alloy with Pr=2.21×10−2 is considered as the working fluid. A 2D computational domain is used relying on the k−ω Shear Stress Transport (SST) for the turbulent momentum flux and the Prt concept for the turbulent heat flux prediction. The effect of uniform and spatially varying Prt assumptions has been investigated. For the in-line bundle, unsteady k−ω SST/Prt=0.85 has been found to significantly underpredict the integral heat transfer with regard to theory, featuring a good to acceptable agreement for wide bundles and Pe≥1150. For the staggered tube bank, steady k−ω SST and a spatially varying Prt has been the best modeling strategy featuring a good to excellent agreement for medium and wide bundles. A poor agreement for compact bundles has been observed for all the models considered.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call