Numerical study of heat transfer of hydrogen combustion in noble gases atmosphere in compression ignition engine

Abstract

The high energy content of hydrogen and zero carbon emission from hydrogen combustion is very important for compression ignition engine development. Hydrogen requires a very high auto-ignition temperature, which encourages replacing nitrogen with noble gases with higher specific heat ratio during compression process. In noble gases-hydrogen combustion, higher combustion temperature potentially leading to a higher heat loss. This paper aims to investigate the effect of hydrogen combustion in various noble gases on heat distribution and heat transfer on the cylinder wall. Converge CFD software was used to simulate a Yanmar NF19SK direct injection compression ignition engine. The local heat flux was measured at different locations of cylinder wall and piston head. The heat transfer of hydrogen combustion in various noble gases at different intake temperatures was studied using the numerical approach. As a result, hydrogen combustion in light noble gases such as helium produces faster combustion progress and higher heat temperature. The hydrogen combustion that experienced detonation, which happened in neon at 340 K and argon at 380 K, recorded a very high local heat flux at the cylinder head and piston due to the rapid combustion, which should be avoided in the engine operation. At a higher intake temperature, the rate of heat transfer on the cylinder wall is increased. In conclusion, helium was found as the best working gas for controlling combustion and heat transfer. Overall, the heat transfer data gained in this paper can be used to construct the future engine hydrogen in noble gases.