Abstract
In this paper, multi-objective particle swarm optimization method is developed for optimizing thermo-hydrodynamic journal bearings. This paper focuses on the use of multi-objective particle swarm optimization algorithm with a combination of the thermal hydrodynamic governing equations of the fluid film (i.e. momentum and energy equations) to optimize hydrodynamic partial pad journal bearings and compare with other articles. The governing equations are solved by the central difference method with a successive over-relaxation scheme and the backward difference with an iterative technique. In the paper, the lubricant viscosity changes with the temperature variation in whole fluid film. In this optimization, the bearing power loss, the minimum oil film thickness, and the maximum oil temperature are considered as objective functions and the radial clearance and length to diameter ratio are selected as design variables. The results of the objective functions are compared to other articles. Also, this study discusses the entropy and availability of two concentric cylinders with low curvature and constant wall temperature. Calculations showed that by increasing the Eckert number, the availability increases.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
