Numerical studies of the influence of textural gradients on the local stress concentrations around fibers in carbon/carbon composites

Abstract

AbstractCarbon/carbon composites produced by chemical vapor infiltration consist of carbon fibers embedded in a matrix of pyrolytic carbon with anisotropic mechanical properties. The matrix around fibers consists of cylindrically shaped pyrolytic carbon layers of coating, which may have different textures with different mechanical properties in the axial, radial and circumferential directions. The goal of the present numerical study is to investigate the influence of the coating microstructure on stress concentrations and possible modes of failure in the carbon composite.Numerical modeling was performed on two length scales. First, the material properties of the differently textured pyrolytic carbon layers were determined on the nanometer scale using methodology based on the Eshelby theory for continuously distributed inclusions. Then, the obtained material parameters for each layer were used as input for the finite element models on the micrometer scale. The numerical simulations were conducted for three basic loading scenarios: uniaxial tension, shear loading and hydrostatic compression. The calculated stress distributions show zones of maximum stress concentrations and provide information on the possible failure regions for each material under all considered loading cases. The numerical results demonstrate good correspondence with experimentally identified failure regions. Copyright © 2008 John Wiley & Sons, Ltd.