Numerical simulation prediction of critical heat flux for 5 × 5 rod bundle with multiple grid spacers and different cladding materials

Abstract

The critical heat flux (CHF) is one of the safety standards for core thermal design and is crucial for the normal operation of the reactor. The CHF problem of rod bundles with grid spacers is a hot topic in related research. The successful design of grid spacers can improve channel CHF by affecting the flow of downstream coolant, and this detection analysis can be achieved through numerical simulation methods. In addition, most simulation studies have not considered the solid region of the cladding, so there is little research on the effect of cladding materials on CHF. The role of grid spacers in rod bundle CHF is the focus of this paper, and the influence of cladding materials is another discussion direction. In this paper, following meticulous mesh generation and computational model validation, a study on the CHF of the 5 × 5 rod bundle with multiple grid spacers and different cladding materials is carried out by using CFD software. The verification results indicated that the physical model established in this study can reasonably predict the generation location and critical power value in the 5 × 5 rod bundle with grid spacers. Furthermore, the study identified that the grid spacer exerts a significant influence on coolant flow within the channel, while the weakening of the mixing effect of the grid spacer on the coolant flow is the main factor to lead the boiling crisis upstream of the grid spacer. By comparing the effects of thermal properties of different materials on CHF, it was found that when the thermal conductivity ratio of the two materials is 1.08, CHF is almost identical under the condition of a reference heat flux of 0.1 MW/m2 as a step size. In addition to thermal properties, further attention may be paid to the influence of surface characteristics of materials on CHF in future work.