Abstract
A 2D RANS numerical model (IH2VOF) is employed to study wave interacting with a circular cylinder with a diameter of 0.02 m in a water depth of 0.27 m, with a wave period of 1.08 s and a wave height of 0.047 m. The influence of the wall proximity on the forces is analyzed for ratios between the pipe (i.e. circular cylinder) distance from the bottom and the pipe diameter varying from 0.04 to 1.5. Results of lift forces and streamlines are compared with the experimental results of Jarno-Druaux et al. (1995) and good agreement is found. Lift, drag and inertia coefficients are also compared with experimental results and the same trend of fundamental quantities with the gap between the cylinder and the bottom was obtained with the model giving slightly larger values. Finally, the influence of the method to estimate the drag and inertia coefficients in the force calculated using Morison equation is analyzed and Morison method shows the better agreement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.