Numerical simulation of two-phase flow in a multi-gas channel of a proton exchange membrane fuel cell

Abstract

Understanding the two-phase distribution characteristics within the multi-gas channel of a fuel cell is important for improving fuel cell performance. In the paper, the volume of fluid model is used to predict the dynamic behaviour of water in the multi-gas channel, analyze the pressure drop, velocity distribution, and flow resistance coefficient between different channels, and investigate the influence of operating conditions, surface wettability and channel structure on the two-phase distribution characteristics in the channel. The results show that water undergoes the processes of growth, separation, single droplet transport, wall impact, droplet collision, liquid film formation, and liquid film transport in the multi-gas channel. Inlet velocity and surface wettability significantly affect the pressure drop, water saturation, and surface water coverage. As the inlet velocity and gas diffusion layer surface wettability increase, the flow resistance coefficient and unevenness of the distribution decrease, indicating that the in-channel flow distribution homogeneity is enhanced. The rectangular channel has better water removal and flow distribution uniformity than the tapered channel, and the unevenness of distribution decreases significantly with decreasing rectangular width, from 0.15715 to 0.00315. The research work is a guide to understanding water transport in multi-gas channels, accelerating water removal, and improving inter-channel flow distribution uniformity.