Abstract
A theoretical investigation of fluid flow, heat transfer and solidification (solidification transfer phenomena, STP) was presented which coupled with direct-current (DC) magnetic fields in a high-speed strip-casting metal delivery system. The bidirectional interaction between the STP and DC magnetic fields was simplified as a unilateral one, and the fully coupled solidification transport equations were numerically solved by the finite volume method (FVM). While the magnetic field contours for a localized DC magnetic field were calculated by software ANSYS and then incorporated into a three-dimensional (3-D) steady model of the liquid cavity in the mold by means of indirect coupling. A new FVM-based direct-SIMPLE algorithm was adopted to solve the iterations of pressure-velocity (P-V). The braking effects of DC magnetic fields with various configurations were evaluated and compared with those without static magnetic field (SMF). The results show that 0.6 T magnetic field with combination configuration contributes to forming an isokinetic feeding of melt, the re-circulation zone is shifted towards the back wall of reservoir, and the velocity difference on the direction of height decreases from 0.1 m/s to 0. Furthermore, the thickness of solidified skull increases uniformly from 0.45 mm to 1.36 mm on the chilled substrate (belt) near the exit.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.