Numerical simulation of transient thermal stresses in medium- and high-temperature latent heat storage systems with different fins: Incorporation of experimental stress cracking

Abstract

Latent heat storage systems play an essential role in energy applications by improving the utilization efficiency and increasing the system flexibility. In this study, a pilot-scale medium-to-high-temperature latent heat storage system was constructed, and experimental heat storage tests were conducted. The temperature distribution of the experimental system was verified through numerical simulations that coupled the physical fields of the fluids, heat transfer, and solid mechanics. Also, the changing dynamic behavior of the stresses in the heat storage process related to the experiments was carefully studied. It was discovered that there were stress concentrations where the heat exchanger tubes touched the casing, with the highest level being over 370.00 MPa. Experimental stress rupture of the shell occurred in the horizontally arranged heat-exchange tubes, whereas vertically arranged tubes significantly reduced the stress at the contact surfaces by 24.70 % according to simulations. Simulation studies on various influencing factors indicated a more significant impact of spiral fins on the system stress. Increasing the preheating temperature by 30 °C reduced stress on the front surface by 109.67 MPa; each 20 °C increase in heating temperature raised the stress by 223.30 MPa, whereas the effect of heat transfer fluid speed was minimal. Regarding the heat-exchange tube dimensions, increasing the height increased the tube body stress by 25.74 MPa, whereas increasing the thickness reduced the stress by 24.20 %. This study comprehensively analyzed the stress dynamics and mitigation strategies of the high-temperature latent heat storage system under various conditions, emphasizing the importance of heat-exchange tube orientation, temperature control, and fin design for optimizing system performance and durability.