Abstract
Herein, the bending behavior of hot‐dip galvanizing hot‐rolled hypersandelin plates, together with the corresponding crack pattern, is numerically investigated by using a hybrid model developed in Ansys LS‐DYNA environment, by combining the discrete element method (DEM) with finite element method (FEM). The experimental bending tests here simulated and available in the literature are performed by considering two types of bath, that is, a pure zinc bath and a technological bath, consisting in a zinc bath with 3% Sn addition by weight. The results related to the bending behavior are compared with both experimental data and other FE numerical results, previously obtained by some of the present authors. Moreover, the numerical crack patterns are compared with the experimental observations of the longitudinal section of the plates at the end of testing, by means of a light optical microscope. A quite satisfactory agreement is observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
