Abstract
Power can be converted with high efficiently between thermal energy and mechanical (acoustic) energy by using thermoacoustic technologies. Thus, the heat transfer characteristics are significant to the understanding of mechanisms, and improvement of efficiency for thermoacoustic devices, notably in heat exchangers. This paper introduces a two-dimensional computational fluid dynamics model of flow across a parallel-plate heat exchanger and investigates the effect of plate spacing on heat transfer characteristics. The open source CFD software OpenFOAM is applied because of the highly customizable capabilities to vary the control parameters. Firstly, the computational model including geometry, boundary conditions, equations, discretization scheme, turbulence and thermophysical properties’ models are presented, and then grid-independence validation is presented to verify the quality of mesh. The simulation results show that plate spacing influences the heat transfer between plates and adjacent area of heat exchanger, and the heat transfer coefficient goes up when the plate spacing decreases. The analysis also indicates that a possible flow transition to turbulence occurred within Re number between 247.2 and 321.4. The results in this work can help the understanding of heat transfer inside thermoacoustic system, and form a basis for future research.
Highlights
1.1 Thermoacoustic systemsIn general, there are two types of thermoacoustic systems, engines and refrigerators
As gas parcels are compressed they move to the hot end of the core with the temperature increases to be slightly higher than the local solid temperature
Heat is being transferred from the gas parcel to the solid
Summary
1.1 Thermoacoustic systemsIn general, there are two types of thermoacoustic systems, engines and refrigerators. The conventional engines and heat pumps need moving parts to work, while thermoacoustic devices do not, which means thermoacoustic engines and refrigerators can be highly reliable and less expensive. The gas parcel expands and the temperature decreases to slightly lower than the local solid temperature, so the working gas is able to absorb heat from the cold end and the parcel returns to original thermodynamic state. With this cycle, the heat is moved from cold heat exchanger to hot heat exchanger, and the acoustic energy is transformed to thermal energy in the form of temperature difference. A high enough temperature difference can drive the gas parcel, and acoustic power will be self-exited and generate work
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
