Abstract
A cylindrical phase change energy storage system was modeled numerically using the finite element method. The model system was composed of a cylindrical container into the center of which is inserted concentrically a copper pipe carrying hot water. Either copper fins or compressed expanded natural graphite (CENG) were placed as heat-conducting fillers between the container and the pipe for comparison. The former is radially positioned while the latter is randomly filled. The remaining space. was filled with paraffin as a phase change energy storage material. Fluid flow, heat conduction and convection, and the paraffin phase change were simulated simultaneously. It was found that the heat transfer performance of the system increases with the number of copper fins when they were used as the filler. The time required to reach heat equilibrium is shortened significantly by increasing the density of the CENG when it was used. CENG is much more effective than copper fins to promote paraffin melting.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.