Abstract
In this paper the effect of grain fragmentation of a cohesionless granular material on the change of microstructure quantities is investigated using a micropolar continuum model. To this end the change of the grain size distribution is related in a simplified manner to a reduction of the mean grain diameter, which enters the constitutive equation as the internal length. The additional densification of the grain skeleton is modelled by a reduction of the incremental stiffness, which is related to the so-called solid hardness defined in the sense of a continuum description. The reduction of the mean grain diameter and the solid hardness caused by grain fragmentation is described by corresponding evolution equations, which depend on an increasing mean pressure and an increasing deviatoric stress. The focus of the numerical investigations is on the evolution of microstructure quantities like the void ratio, mean grain diameter and couple stresses under monotonic compression. It is shown that for an initially inhomogeneous distribution of the void ratio polar quantities like microrotations and couple stresses can develop even outside of shear bands. With increasing compression the polar quantities can increase, while the range of fluctuation of the void ratio decreases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.