Abstract
The objective of the presented work is to investigate models which simulate boundary layer transition in turbomachinery flows. This study focuses on separated-flow transition. Computations with different algebraic transition models are performed three-dimensionally using an implicit Navier-Stokes flow solver. Two different test cases have been chosen for this investigation: First, a linear transonic compressor cascade, and second an annular subsonic compressor cascade. Both test cases show three-dimensional flow structures with large separations at the side-walls. Additionally, laminar separation bubbles can be observed on the suction and pressure side of the blades of the annular subsonic cascade whereas a shock-induced separation can be found on the suction side of the blades of the linear transonic cascade. Computational results are compared with experiments and the effect of transition modeling is analyzed. It is shown that the prediction of the boundary layer development can be substantially improved compared to fully turbulent computations when algebraic transition models are applied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.