Abstract
Transient temperature fields during formation of dissimilar butt joints of Ti-Al alloy plates by laser welding process were investigated by numerical simulation. Gaussian volumetric heat source was applied to model the heat input to the weld. For verification of the developed simulation model and results of numerical simulation, Ti-Al butt weld joints were produced by TruDisk 4002 disk laser. During experiments, the temperatures were measured by thermocouples and subsequently compared with results of FEM analysis. Based on the results of preliminary numerical calculations and experimental tests, the parameters of the laser beam welding for production of dissimilar Ti-Al butt joints will be optimized using FEM simulations in the program code ANSYS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.