Abstract
To address the structural concerns of a 12.0 m-span landing assembled single-tube frame (LASF) for Chinese solar greenhouses subjected to snow loads, the internal forces and deformations of LASF and its reinforced counterpart (RLASF) were numerically simulated to determine the ultimate bearing capacities (Lu) and the failure loads (Lf). During the simulations, steel tubes were modeled as beam188 elements and cables as link180 elements. The frame constraints and the connections were assumed to be fixed supports and rigid, respectively. The loads were determined according to the Chinese standard (GB51183-2016). Simulations revealed that the LASF and RLASF primarily withstand bending moments and are prone to strength failures under snow loads. Both exhibited lower Lu and Lf under non-uniform snow loads than under uniform snow loads. The results also indicated that crop loads could deteriorate the structural safety of the LASF and RLASF. Lu and Lf were found to be proportional to the section modulus of the tubes. The effects of wind loads and initial geometry imperfections on Lf of the LASF and RLASF can be neglected. Furthermore, the RLASF exhibited higher Lf compared to the LASF. Steel usage of the RLASF could be further reduced by replacing circular tubes with rectangular tubes, making the RLASF a feasible option for constructing Chinese solar greenhouses.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.