Abstract
In this study, the Lagrange element strength reduction method is used to explore slope stability and as an evaluation method of underground mining of end-slope coal in a rock-stability analysis. A numerical analysis model is established herein using the geological conditions for mining in a coordinated open pit with an underground mining area of the Anjialing Open-Pit Mine and Underground No. 2 Mine. Additionally, the evolution law of slope stability in open-pit end-slope mining is studied using the proposed numerical simulation method. According to our findings, the steps show obvious horizontal movement and deformation under the influence of underground mining disturbances. Taking the horizontal displacement at the slope tops of the steps as the deformation index, the entire disturbed slope is divided into four regions: upper, middle-upper, middle-lower, and lower steps. When a step is fully affected by underground mining, its subsidence value first increases rapidly and then slowly. An exponential function is used to reflect the change rule in the step-subsidence value as the working face advances. In the underground mining process, the critical sliding surface of the slope develops along the soft rock or coal seam, showing an L-shaped or a W (double L)-shaped broken line. As the working face advances, the initial position of the sliding mass is unchanged while the cutting position alternately changes up and down in the weak plane. The safety factor suddenly drops when the advancing distance exceeds a certain value.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.