Abstract

In the present study, using the open source OpenFOAM code, a numerical simulation is performed taking the adaptive mesh refinement (AMR) technique during solution. Formation of liquid sheet after the impact of two identical cylindrical jets at various conditions is studied. Since the flow pattern depends upon the Reynolds and Weber numbers, numerical tests are conducted at a variety of flow velocities and Reynolds numbers to demonstrate the effect of these parameters on the sheet formation. It is then concluded that at various conditions, different instabilities occur in the flow; hence, different sheet formations a flow patterns happen.In this study, impact of two dissimilar cylindrical fluid jets is successfully simulated for the first time in literature. Actually, water and oil jets are taken into account and their impact behavior is studied. In the presence of the surrounding air, an unstable sheet will form after impact due to the high injection speed of the jets. As depicted in the results, since the inertia and other physical characteristics of the two fluids are dissimilar, different phases are more intensely diffused.DOI: http://dx.doi.org/10.4995/ILASS2017.2017.4865

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.