Abstract
In this work, the cold and combustion flow characteristics of a trapped vortex combustor with inverse diffusion combustion method have been studied numerically, and the effects of four jet arrangement schemes on the vortex structure, temperature distribution, turbulence kinetic energy, OH mass fraction and combustion efficiency were compared. The results indicate that the vortex structures in cold state are basically the same with a double vortex structure for all the jet schemes. However, when the jet holes are arranged on the after-body wall, the vortex changes from a double vortex structure in cold state to a single vortex structure in combustion state, the combustion effect is not too large when the jet holes are arranged on the fore-body wall. The high-temperature distribution in cavity is mainly concentrated in the upper part, but when the jet holes are arranged on the after-body wall, the OH mass fraction distribution is higher than that when the jet holes are arranged on the fore-body wall. In addition, when the jet holes are arranged on the fore-body wall, complete combustion can be accelerated. In general, when the jet holes are arranged in the same position, the multi-jet scheme is more conducive to flame stability in cavity and the improvement of combustion and mixing performance than the coaxial jet.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Aeronautical and Space Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
