Abstract
The full combustibility and strong discontinuity characteristics of module charge result in significant differences from conventional mode, making it challenging for traditional two-fluid methods to effectively reveal its particle dispersion mechanism. In this study, the particle element method for module charge were developed and applied for modeling the interior ballistics to overcome above drawback. Firstly, based on the characteristics of module charge and particle aggregation, criteria for dividing particle elements and methods for motion calculation are proposed. Next, particle element solver and CFD solver are constructed and mutually coupled for solution. Finally, validation is conducted under the condition of three modules charging. The computational results show that the particle element method can effectively predict the pressure and velocity inside the chamber, consistent with experimental results, the pressure error is 5.55 % and the velocity error is 0.79 %. The particle element method reproduces the combustion process with variable particle mass, accurately presenting the distribution of the flow field and temperature. Moreover, it fundamentally explains that pressure fluctuations occur due to the presence of free space and changes in the flow field caused by the movement of the propellant bed. The particle element method can provide scientific research methods and technical support for the development of module charge technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
