Abstract
In this paper, heat transfer and water flow characteristics in wavy microchannel heat sink (WMCHS) with rectangular cross-section with various wavy amplitudes ranged from 125 to 500 μm is numerically investigated. This investigation covers Reynolds number in the range of 100 to 1000. The three-dimensional steady, laminar flow and heat transfer governing equations are solved using the finite-volume method (FVM). The water flow field and heat transfer phenomena inside the heated wavy microchannels is simulated and the results are compared with the straight microchannels. The effect of using a wavy flow channel on the MCHS thermal performance, the pressure drop, the friction factor, and wall shear stress is reported in this article. It is found that the heat transfer performance of the wavy microchannels is much better than the straight microchannels with the same cross-section. The pressure drop penalty of the wavy microchannels is much smaller than the heat transfer enhancement achievement. Both friction factor and wall shear stress are increased proportionally as the amplitude of wavy microchannels increased.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Communications in Heat and Mass Transfer
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.