Numerical Simulation of Heat Transfer Coefficient on Turbine Blade using Intermittency Factor Equation

Abstract

Listen

Translate article

This paper deals with the numerical simulation of fluid flow and heat transfer coefficient on a gas turbine blade. The mathematical model of flow is based on the Reynolds Averaged Navier-Stokes (RANS) equations completed with the formulation of transition model by using an intermittency transport equation. An intermittency based transition model, which is critical for invoking transition onset according to Abu-Ghannam and Shaw correlation, is implemented into the proven Reynolds-Averaged N-S (RANS) solver. The intermittent behavior of the transitional flow is incorporated into the computation by modifying the eddy viscosity μt, obtained from a turbulence model. Wilcox [4] low Reynolds k−ω turbulence model is employed to calculate the eddy viscosity and others turbulent quantities. This model is designated for the prediction of flow transition under the influence of freestream turbulence (FST). The current model is applied to prediction of a modern high pressure turbine experiment, and detail comparisons of the computational results with the experimental data are presented. The model has been shown to be capable of predicting the high pressure turbine flow transition under a variety of Reynolds number and free stream turbulence conditions.