Numerical Simulation of Gas-Liquid Dispersion in A Stirred Tank Agitated by Punched Rigid-Flexible Impeller

Abstract

Abstract The hydrodynamics of gas-liquid dispersion process in a stirred tank with rigid impellers, rigid-flexible impellers, and punched rigid-flexible impellers were investigated using a combined computational fluid dynamics (CFD) and population balance model (PBM) approach. A classical Eulerian-Eulerian approach coupled with standard k-e turbulence model was employed to simulate gas-liquid turbulent flow in the stirred tank. The multiple reference frame (MRF) approach was used to simulate impeller rotation. The effects of impeller type, flexible connection piece length, aperture size/ratio, impeller speed and superficial gas velocity on the local gas holdup and bubble size distribution for the gas-liquid dispersion process were investigated. Results showed that a long flexible connection piece length was conductive to the gas-liquid dispersion process. The optimum aperture ratio and aperture diameter were 12 % and 8 mm, respectively, for the gas-liquid dispersion process. Punched rigid-flexible impeller could reduce the differential pressure ahead and behind the impeller blade, decrease the size of low-pressure zone, and improve the water shear strain rate compared with rigid impeller and rigid-flexible impeller at the same Pg,v. It was found that punched rigid-flexible impeller was more efficient in terms of gas dispersibility than rigid impeller and rigid-flexible impeller.