Abstract
Hydraulic fracturing is repeated in some unconventional wells after production since the initial fracturing treatment. Due to prior production, the stress field around the existing fractures possibly rotates, and this impacts the refracturing operation. In this study, an extended finite element model (XFEM) including junction enrichments of intersecting fractures was proposed to simulate fracture propagation during refracturing in the cemented fractured reservoirs. In the XFEM model, a lubrication equation coupling both tangential and normal flow in hydraulic fractures (HFs) was used to describe the fluid flow behavior within the fractured elements, and the Newton-Raphson method was used to solve the nonlinear fluid–solid coupling system of the refracturing model. The effects of approaching angle, stress anisotropy, and production time were discussed. The results showed that the effects of these factors on improvement of fracture complexity during refracturing depend on the reservoir parameters and the stress field. The characteristics of the injection pressure curves during refracturing were analyzed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
