Numerical simulation of flow over three circular cylinders in equilateral arrangements at low Reynolds number by a second-order characteristic-based split finite element method

Abstract

In this paper, two versions of a second-order characteristic-based split scheme are developed in the framework of incremental projection method for the solution of incompressible flow problem. After the demonstration of the good accuracy and effectiveness of the developed schemes, a flow over three equal circular cylinders arranged in equilateral-triangle arrangement is numerically investigated on unstructured mesh systems. The examined Reynolds number is 100 and the flow is supposed to be laminar. Computations by the developed algorithm are then performed for six gap spacings, s, ranging from 0.5 to 4.0, and for three incidence angles, α = 0°, 30° and 60°. Numerical results show that, at sufficiently small and large s, the range of which is different for different α, the flow interference is dominated by proximity and wake effect, respectively. And in the intermediate range of the spacing, the flow pattern is influenced by both of them. The mean force results are compared with the existing experimental measurements and that shows a similar trend in the variation of mean force with the spacing for different Reynolds number. It is also observed that the interference effect transitions plays an important role in the variation of the fluctuating forces and Strouhal number.