Abstract
For a deeper understanding of the flow characteristics in the high-pressure centrifugal blower of a fan of Model 9–26 with splitter blades, a three dimensional (3-D) numerical simulation of air flows in the fan was conducted with FLUENT software. The standard k-e turbulent model and unstructured grids were used. The computational fluid dynamics (CFD) results showed that the performance of a fan could be improved by adding the splitter blades in the channel among the leaf blades. Under operational conditions, with the presence of splitter blades, the air flow rate of the fan increased about 5% and the total pressure at the outlet of the fan increased about 10% on average. It was also found that the length of the splitter blades affected the air flow and pressure drop. There is an optimal value for the length. The simulation results provide helpful information for improving the fan performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Frontiers of Energy and Power Engineering in China
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
