Abstract
There are many types of wind turbine. Large propeller-type wind turbines are used mainly for large wind farms and offshore wind power generation. Small vertical-axis wind turbines (VAWTs) are often used in distributed energy systems. In previous studies on wind turbines, the basic characteristics such as torque coefficient have often been obtained during rotation, with the turbine rotating at a constant speed. Such studies are necessary for the proper design of wind turbines. However, it is also necessary to conduct research under conditions in which the wind direction and wind speed change over time. Numerical simulation of the starting characteristics is carried out in this study. Based on the flow field around the wind turbine, the force required to rotate the turbine is calculated. The force used to stop the turbine is modeled based on friction in relation to the bearing. Equations for the motion of the turbine are solved by their use as external force. Wind turbine operation from the stationary state to the start of rotation is simulated. Five parameters, namely, blade length, wind turbine radius, overlap, gap, and blade thickness, are changed and the optimum shape is obtained. The simulation results tend to qualitatively agree with the experimental results for steadily rotating wind turbines in terms of two aspects: (1) the optimal shape has an 20% overlap of the turbine radius, and (2) the larger the gap, the lower the efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have