Numerical Simulation and Wind Tunnel Test of a Variable Geometry Auxiliary Inlet for a Wide-Body Aircraft Environmental Control System

Abstract

A variable geometry auxiliary inlet for a wide-body aircraft environmental control system with moveable deflectors operating in a large mass flow rate range is studied through numerical simulation and wind tunnel tests, which yields a design method for the variable geometry auxiliary inlet with high performance. The characteristics of the flow field are studied by numerical simulation. The results show that the favorable pressure gradient and the roll-up vortices are the major impetus that inhales the incoming flow into the inlet. The law of regulation and the performance variation under different conditions are obtained by wind tunnel test. The flow coefficient increases first but then decreases with the increase in the inlet opening, and the pressure rise ratio and total pressure recovery coefficient increase first and then decrease with the increase in the mass flow rate. In general, under the condition of a high Mach number (Ma > 0.4), the inlet opening of this test configuration should not exceed 50%. The deflectors can maintain the normal work of the environmental control system by moving properly to control the mass flow rate of the auxiliary inlet.