Abstract
Die casting processing analysis was conducted and the gating system and the cooling system were designed for aluminum alloy gearbox housings. Numerical simulation software PROCAST was used to calculate the filling and solidification sequence and the temperature field of die castings. The reasonable designs of the gating system and the cooling system were obtained. The feasible die casting mould was designed and manufactured. Production trial showed that, casting molding effect is good, and there were not defects such as misrun, cold lap. After machining, there were not defects exceeding the allowed limited values including porosity, shrinkage, and slag inclusion in the products. The trial showed that the product mold design and die casting technology achieved the desired effect, which can realize batch production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
