Abstract
Abstract In response to the challenges of feed delay and inconsistent wire production in existing 3D printers, a novel 3D simulation model for spiral extrusion 3D printers was developed. This model incorporates the particle filling rate within the spiral groove as a critical evaluation criterion, establishing a correlation between the transport section parameters and the filling rate. The simulation software STAR-CCM+ was utilized for in-depth analysis, leading to structural optimizations based on various feeding mechanisms. The effects of different hopper models on feeding efficiency were investigated using the principles of the discrete element method. The findings indicate that the enhanced feed structure effectively addresses particle transportation issues within the printer. An increase in rotational speed is shown to improve the filling efficiency of the spiral groove, while simultaneously reducing the residence time of the particle material in the extruder, which in turn affects particle melting quality. By integrating the simulation data with experimental validation, an optimized printing structure was designed to fulfill the requirements of spiral extrusion printers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.