Numerical prediction of turbulent flow and heat transfer in buoyancy-affected liquid metal flows

Abstract

The present paper investigates the capabilities of some selected Reynolds-Averaged Navier Stokes (RANS) based turbulence models in reproducing liquid metals thermal hydraulics Direct Numerical Simulation (DNS) data. For this purpose, forced and mixed convection conditions, both addressing buoyancy-aided and buoyancy-opposed flow, are considered. The paper mainly focuses on velocity and temperature fields estimation, providing a comparison between the RANS and DNS computations. The capabilities of the turbulence models are discussed with the aim to highlight which ones provide the best predictions.In particular, attention is paid to the approach adopted for the calculation of the turbulent heat flux contributions. Together with models assuming the commonly adopted Simple Gradient Diffusion Hypothesis (SGDH) approach and the Reynolds analogy, a model including the Algebraic Heat Flux Model (AHFM) approach is considered. While being a practical and robust approach to deal with turbulent heat fluxes, the SGDH approach shows intrinsic limitation in dealing with liquid metal thermal hydraulics, mainly because of their low-Prandtl number. The adoption of a more advanced AHFM method may instead relevantly improve the quality of the obtained predictions.The obtained results show that the selected model adopting the AHFM method provides definitively better predictions of the addressed phenomena with respect to the ones considering the SGDH approach. While some discrepancies are still observed for the velocity fields, the temperature fields are captured very well, suggesting a clear superiority of the AHFM model. The present paper thus provides further validation and supports the use of AHFM as a valuable tool to predict turbulent heat fluxes.