Numerical prediction analysis of the fluctuating pressure and rudder force of full-scale hull-propeller-rudder system

Abstract

In order to analyze the fluctuating pressure and rudder force characteristics of a full-scale hull-propeller-rudder system, a hybrid structured/unstructured grid was combined with the Reynolds-averaged Navier-Stokes (RANS) and volume of fluid (VOF) methods to perform a numerical prediction of model and full-scale performance for the Kriso Container Ship (KCS) case. A numerical simulation for the self-propulsion test of a full-scale ship was first performed to obtain the propeller velocity under the self-propulsion point, the results of which indicated a notable wake fraction and velocity scale effect at the self-propulsion point. Transient two-phase flow calculations were then performed for the model and full-scale KCS hull-propeller-rudder systems. According to the monitoring data, the hull surface fluctuating pressure and rudder force fluctuated periodically over time and the full-scale fluctuating pressure exhibited a higher time-average value as compared to the model-scale pressure. The frequency spectrum curves were also generated by the fast Fourier transform algorithm. The analysis of the frequency spectrum data indicated that the peaks of the fluctuating pressure and rudder force reached their respective maximums at the blade passing frequency (BPF), after which the peak gradually decreased and the full-scale ship reduced more quickly. Furthermore, fluctuating amplitude of full-scale ship was bigger than model-scale.