Numerical Optimization, Characterization, and Experimental Investigation of Additively Manufactured Communicating Microchannels

Abstract

The degree of complexity in internal cooling designs is tied to the capabilities of the manufacturing process. Additive manufacturing grants designers increased freedom while offering adequate reproducibility of micro-sized, unconventional features that can be used to cool the skin of gas turbine components. One such desirable feature can be sourced from nature; a common characteristic of natural transport systems is a network of communicating channels. In an effort to create an engineered design that utilizes the benefits of those natural systems, the current study presents wavy microchannels that were connected using branches. Two different wavelength baseline configurations were designed, then each were numerically optimized using a commercial adjoint-based method. Three objective functions were posed to (1) minimize pressure loss, (2) maximize heat transfer, and (3) maximize the ratio of heat transfer to pressure loss. All baseline and optimized microchannels were manufactured using Laser Powder Bed Fusion for experimental investigation; pressure loss and heat transfer data were collected over a range of Reynolds numbers. The additive manufacturing process reproduced the desired optimized geometries faithfully. Surface roughness, however, strongly influenced the experimental results; successful replication of the intended flow and heat transfer performance was tied to the optimized design intent. Even still, certain test coupons yielded performances that correlated well with the simulation results.