Abstract
A through-process methodology for numerical simulations of the structural behaviour of thin-walled cast magnesium components is presented. The methodology consists of casting process simulations using MAGMAsoft, mapping of data from the process simulation onto a FE-mesh (shell elements) and numerical simulations using the explicit FE-code LS-DYNA. In this work, generic High Pressure Die Cast (HPDC) AM60 components have been studied using axial crushing, 3-point bending and 4-point bending tests. The experimental data are applied to obtain a validated methodology for finite element modelling of thin-walled cast components subjected to quasi-static loading. The cast magnesium alloy is modelled using a user-defined material model consisting of an elastic–plastic model based on a modified J2-flow theory and the Cockcroft–Latham fracture criterion. The fracture criterion is coupled with an element erosion algorithm available in LS-DYNA. The constitutive model and fracture criterion are calibrated both with data from material tests and data from the process simulation using MAGMAsoft.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.