Numerical modelling of the generation and transport of heat in a bottom ash monofill

Abstract

Municipal solid waste is incinerated to reduce its volume, toxicity and reactivity. Several studies have shown that the resulting bottom ash has a high exothermic capacity. Temperature measurements in municipal solid waste incineration (MSWI) bottom ash landfills have found temperatures up to 90 °C. Such high temperatures may affect the stability of the landfill’s flexible polymer membrane liner (FML) and may also lead to an accelerated desiccation of the clay barrier. The purpose of this study was to gain detailed knowledge of temperature development under several disposal conditions in relation to the rate of ash disposal, the variation of layer thickness, and the environmental conditions in a modern landfill. Based on this knowledge, a simulation was developed to predict temperature development. Temperature development was simulated using several storage periods prior to the deposition and several modes of emplacement. Both the storage time and the mode of emplacement have a significant influence on the temperature development at the sensitive base of the landfill. Without a preliminary storage of the fresh quenched bottom ash, high temperatures at the bottom of a landfill cannot be avoided.