Abstract
ABSTRACTA finite element model based on software Abaqus/Explicit and experimentation was established to describe the probeless friction stir spot welding process of 2198-T8 aluminium alloy. An Arbitrary Lagrangian–Eulerian method was adopted in this model in which the Johnson–Cook equation was used to describe the flow stress depending on temperature, plastic strain and strain rate. The experimental results revealed the representative microstructure of the joint which has three typical zones: stir zone, thermo mechanically affected zone and heat affected zone. The relationship between the temperature field and dwell time was investigated based on the accurate description of temperature field. A model of the material flow was developed based on the numerical and experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
