Abstract
Sn possesses three times higher capacity in comparison to graphite anode (372 mAhg–1) that makes it a promising candidate for enhanced performance Li ion batteries. Contrary to Si, Sn is compliant and ductile in nature and thus is expected to readily relax the Li diffusion-induced stresses. The low melting point of Sn additionally allows for stress relaxations from time-dependent or creep deformations even at room temperature. In this study, numerical modeling is used to reveal the significance of plasticity and creep-based stress relaxations in the Sn working electrode. The maximum elastic tensile hoop stresses for 1 μm micropillar size with 1C charging rate conditions reduces down from ∼1 GPa to ∼200 MPa when Sn is allowed to plastically deform at a yield strength of ∼150 MPa. After experimentally determining the creep response of Sn micropillars, creep deformations are incorporated in numerical modeling to show that the maximum tensile hoop stress is further reduced to ∼0.45 MPa under the same conditio...
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
